Castle Sidewinder 4 WP Sensorless ESC (SCT) w/ 1410-3800 Sensor Ready Motor

While the all new SIDEWINDER 4(TM) builds upon Castle’s most popular platform, the SIDEWINDER 1:10 SCALE SERIES, it is the first of its kind to run Castle’s newest technology, CRYO-DRIVE(TM). CRYO-DRIVE(TM) combines technology from cutting-edge hardware and software advancements to increase thermal performance. COOLER TEMPS mean LONGER RUNS and MORE POWER in your SIDEWINDER 4 setup.

Additional Features:

• 2s - 3s LiPo 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run.
• Sensorless brushless and/or brushed motor operation.
• Waterproof design ESC and splash resistant 30MM fan
• 5.0 volts fixed, 2 amps Peak BEC
• Audible alerts for error conditions
• Enhanced drag brake functionality
• Smoother sensorless startups
• Convenient transmitter programming for six common adjustable settings
• Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card  (sold separately)
• Telemetry Link  compatible for Futaba® S.BUS2 (sold separately)

The SIDEWINDER 4 is a versatile ESC and is accepted in a wide variety of applications.  Whether throwing dirt, ripping through a corner or steadily dominating the trails, Castle has you covered!

This combo includes a Sidewinder 4 ESC and 1410-3800Kv sensored motor. The 1410-3800kv is perfect for short course trucks running on 2s LiPo and weighing up to 6.5 lbs it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.

Sidewinder 4 combo includes:

• Sidewinder 4 ESC
• Castle 1410-3800Kv sensored motor
• Driver's Ed and Guide Start Guide
• 1/10th scale gearing chart
• Decal sheet

Technical Specs

• Controller
  • Input Voltage Range:     2s - 3s LiPo 6 - 8 cell NiMH
  • BEC Specifications:     5.0 volts fixed, 2 amps.
  • Operating Environment:     Waterproof design allows for use in nearly any environment
  • Brake:     Proportional
  • Reversible:     Yes, but may be disabled for racing.
  • On/Off Switch:     Yes
  • Cooling Fan:     30mm fan included
  • ESC Size:     L: 2.08" (52.92mm)
  • W: 1.50" (38.05mm)
  • H: 1.28" (32.56mm)
  • ESC Weight (w/wires):     2.26 oz. (64 g)
  • Connectors:     4mm female bullets for motor connection.
  • Items Needed for Operation:     Battery Connector required Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended.
  • Product Use Statements:     Although Sidewinder 4 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
  • Application Guidelines:     
    • For short course trucks running on 2s LiPo and weighing up to 6.5 lbs it can be run on a 3s LiPo with very conservative gearing.
    • It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.
  • Recommended Motors:     Combo includes 1410-3800kv brushless motor.
  • Max. Recommended Vehicle Weight:     No more than 6.5lbs with battery, ready-to-run.
  • Programmability:     Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.
  • Telemetry Link Capable:     No
  • Tech Notes:     Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Brushless setups frequently hit 100+ amps in peaks. Castle strongly suggests using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Castle's experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
• Motor Technical Specs
  • Input Voltage Range:     2-3S LiPo
  • Kv:     3800
  • Max. RPM:     100,000
  • Size:     Length: 52.7mm
  • Diameter: 36mm
  • Weight (w/wires):     237g/ 8.4oz
  • Shaft Size:     Length: 15mm
  • Diameter: 1/8" (3.17mm)
  • Mounting Hole Specifications:     M3 @ 25mm
  • Cooling Fan:     Optional
  • Connectors:     4mm male Castle Bullet Connectors
  • Application Guidelines:     
    • For short course trucks running on 2s LiPo and weighing up to 6.5 lbs it can be run on a 3s LiPo with very conservative gearing.
    • It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.
  • Max. Recommended Vehicle Weight:     6.5lbs
  • Tech Notes:     
    • Monitor motor temperatures closely overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.
    • Water Resistant Design: Routine maintenance is recommended after running in wet conditions.

Used with permission, copyright ©2022 Castle Creations. Copyright ©2022 Brey Corp. t/a Hobby Works®