Hobbywing XR10 PRO ESC G2 Elite

What comes in the box?

• XR10 PRO ESC w/ a cooling fan
• (2) Input wires and (3) Output wires -pre soldered-
• (2) X Cooling fan (comes with one back-up fan)
• Dual capacitors
• Decals
• Bonus parts: heat tubes, double tape, nylon cable zap traps

Features:

• Upgraded 32-bit M4 microprocessor with more powerful processing capability guarantees stable control and rapid response. (Industrys highest 32-bit microprocessor, increased processing speed by X4)
• Peak current up to a 1200A.
• Built-in switch mode BEC with a maximum output of 10A and a voltage adjustable from 5V to &.4v (step: 0.1V) for usage with servos and other devices require different voltages.
• Variable frequency regulation of PWM and brake frequencies allows users to precisely regulate the driving braking forces (of the motors).
• Expanded range of the max bake force brings in the active brake ranges from 101% to 150%.
• Softening function (Hobbywing-initiated) for milder or wilder driving control and better driving efficiency.
• 10 select-to-use profiles applicable to all 1/10th RC car racing.
• Internal electronic key switch (included in the product box) is applicable to different situations.
• Separate PRG/FAN port is able to power an external fan for maximized cooling performance or connect a LCD program (sold separately), users are able to program parameters, upgrade firmware and check relevant data during the even using either iPhone or Android devices.
• Switchable motor direction (CCW/CW) for various chassis.
• Multiple protections comes in standard.
• Low-voltage cutoff protection.
• ESC and motor thermal protection.
• Fail safe (throttle signal loss protection).
• Reverse polarity protection.
• Firmware upgrade via Hobbywing multi function LCD program or OTA (items sold separately).

The external standard cappack will still be damaged if battery reversal occurs. For full protections, recommend to use Hobbywing SMT-MLCC capacitor banks (sold separately)

Specs:

• Wires    13 AWG (Racing)
• Secondary Extended power    Optional (not included)
• Application    Brushless motor system for 1/10th, 1/12th Touring Cars and
• Buggies Racing, Splash proof
• Cont./Peak Current    160A/1200A
• Input Voltage    2S Lipo/5-6 Cell NiMH
• BEC Output    5V-7.4V
• Wires and connectors    13AWG 200mm
• Programming device    LCD program box / OTA programmer (available through Firmware update)
• Firmware    LCD Program box via USB software (PC only) / OTA (iOS / Android)
• Size and Weight    37.5x30.9x32.5mm / 95g
• Motor spec recommendation    1/10th Touring Car greater than or equal to 4.5T / 1/10th Buggy greater than or equal to 5.5T 3650 Motor

Used with permission, copyright 2021 HOBBYWING North America. Copyright 2021 Brey Corp. t/a Hobby Works