Estes Rockets Green Eggs Bulk Pack

An Egg lofting rocket designed for a teachers needs and budget!

Designed for C11 and D engines. Carrying a regular size raw egg as a payload comes very close to exceeding max lift capability of most C6 engines used in other eggloft kits. Use C11 engines and you get a safe stable flight and a recovery suited for small school size flying fields.

Clear payload is big enough to carry TWO eggs! (with a D12-3 engine).

Swept fins allow the rocket to stand by itself. The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with awkward stand-off needed.

All these features add up to less time building and more time for your students to perform experiments with their eggstronauts.

WHAT YOU NEED TO BUILD:

• Scissors
• Pencil
• Ruler
• Fine sandpaper
• Carpenters glue
• Sanding block
• Hobby knife
• Masking tape
• Clear tape
• Primer (white)
• Paint (green, white)
• Clear coat (optional)

Tools, construction and finishing supplies not included.

WHAT YOU NEED TO LAUNCH (sold separately):

• Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller
• Estes model rocket engines
• Starters
• Recovery wadding
• Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

Used with permission, copyright 2021 Estes-Cox Corp./Tower Hobbies, Inc. Copyright 2021 Brey Corp. t/a Hobby Works.