Timber X 1.2m BNF Basic with AS3X and SAFE Select

The original Timber captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling.

From low-time to very experienced pilots, nearly everyone enjoys flying the Timberbut some wish it had even more aerobatic capability. The E-flite Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance youd expect from an all-out aerobat!

Needed to Complete

• Full-range, 6+ Channel DSMX/DSM2 transmitter
• 22003200mAh 34S LiPo flight battery (EFLB22003S30 or EFLB22004S30 recommended)
• Compatible LiPo charger

Whats in the Box?

• (1) E-flite Timber X 1.2m with
• (1) 50A Brushless ESC
• (1) Brushless Outrunner Motor
• (6) High-Torque, Metal-Geared Servos
• (1) Spektrum AR636 6-Channel Receiver
• (1) Set of Optional-Use Leading Edge Slats
• (1) Product Manual

The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability.

Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly mild to wild experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe thats capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. Its also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!

SAFE Technology

Bind-N-Fly Completion Level Advantage

With SAFE Select enabled, you get:

• Pitch and Bank Angle Limits
• Automatic Self-Leveling
• Easy Switch Assignment- No Programming Required

If you dont want to enable the SAFE Select features, just bind the receiver normally and it will function like a standard AS3X receiver.

eXtreme Maneuverability

The Timber X 1.2m features a new wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can now travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Pockets in the rear of the fuselage and the included optional-use steel stabilizer joiner give you additional options to fine-tune the models performance for even wilder 3D setups- or on low rates the controls can be as smooth and docile as they are on the original so you can fly as mild or as wild as youd like!

eXtra Power

The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.

eXtremely Durable

Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.

STOL (Short Takeoff and Landing) Capable

The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor make it possible to spring into the air or float down to land in as little as two feet or less.

LED Lights

Like the original, the Timber X 1.2m comes with realistic-looking LED landing, navigation, and strobe lights that are factory-installed and powered from the flight battery.

Optional Floats

Owners of an original Timber 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.

Used with permission, copyright 2021 E-Flite/Horizon Hobby, Inc. Copyright 2021 Brey Corp. t/a Hobby Works.