WARNING: This product can expose you to chemicals including volatile organic compounds (or VOCs), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The material has a very low viscosity and a mix ratio of 1:1 by weight or by volume which allows anyone from the experienced rapid prototyper to the hobby enthusiast to make a perfect part every time. The material also features a 90 second work time with a color change in the cure to let the user know when his/her pot life is up. Demold times typically range from 5 to 8 minutes depending on the temperature and mass of the material being casted. Available in Tan or Black. This is the BLACK kit.
Mix Ratio (wt. or Vol.)1:1
Pot Life (100g mass @ 75 degrees F)90 seconds
Demold Time (100g mass @ 75 degrees F)5-8 minutes
Mixed Viscosity (cps.)190
Shore Hardness (ASTM D-2240)72 D
Tensile Strength (ASTM D-638) (psi)6,000
Used with permission, copyright 2016 Alumilite Corporation. copyright 2016 Brey Corp. t/a Hobby Works.