The low viscosity along with the white appearance makes this material ideal for users who are looking for perfect cosmetics in their castings. The material has a mixed viscosity less than 100 cps and a mix ratio of 1:1 by weight or by volume. The material features a 2.5-3 minute work time and transitions from clear to opaque white to let the user know when the pot life is expiring. Demold time typically ranges from 5 to 15 minutes depending on the mold temperature and the mass of the material being cast. We always recommend warming the mold before casting to achieve a more consistent and thorough cure. 
Specifications
ColorWhite
Mix Ratio (wt. or Vol.)1:1
Pot Life (100g mass @ 75 degrees F)2.5 - 3 minutes
Demold Time (100g mass @ 75 degrees F)5-15 minutes
Mixed Viscosity (cps.)90
Specific Gravity1.05
Shore Hardness (ASTM D-2240)72 D
Shrinkage (in./in.).006
Tensile Strength (ASTM D-638) (psi)4,500
Elongation (in./in.)10%
Temperature Resistance185 F
Used with permission, copyright 2016 Alumilite Corporation. Copyright 2016 Brey Corp. t/a Hobby Works.
WARNING: This product can expose you to chemicals including volatile organic compounds (or VOCs), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$6 Flat Rate Shipping. FREE Over $199* Most Orders