This 14.8V (4S) 5200mAh 50C lithium polymer hard-case battery pack is a high-performance option for a variety of different applications including 1/8 scale trucks and buggies.

These lipo packs are made with our ultra-compact 5200mAh cells that give you a weight savings of up to 20% versus 5000-5200mAh lipos from many other manufacturers. That massive weight savings means lighter total loads and more agile, powerful performance from your vehicle.

Compatible With:

• 1/8 Scale Trucks and Buggies

Dimensions:

• Length: 138mm (5.44 in.)
• Width: 46mm (1.82 in.)
• Height: 48mm (1.89 in.)
• Weight: 481g (16.97 oz)

COMMENTS:

• ALWAYS use a LiPo-approved Charger/Balancer
• NEVER Charge over 4.20V per cell
• NEVER Charge at currents greater than 3C
• NEVER Trickle Charge
• NEVER allow to Discharge below 2.5V per cell
• NEVER disassemble or modify pack wiring in any way or puncture cells
• NEVER place on combustible materials or leave unattended during charging
• ALWAYS Charge in a fireproof location (use a Lipo bag!)
• ALWAYS remove from vehicle for charging
• ALWAYS set chargers output volts to match battery volts
• ALWAYS keep out of reach of children

For more general safety guidelines on handling, using, and storing Lithium batteries go to the manufacturers website, and see more warnings here.

Used with permission, copyright ©2021 Horizon Hobby, Inc. Copyright ©2021 Brey Corp. t/a Hobby Works.®