This footbridge easily spans a 4-lane Scalextric, Ninco, or SCX (and similar sized) track with room for borders, though depending on the cars you run you may need to put risers under the ends to clear some high-wing cars on the outer lanes. And, of course, it spans a 2-lane track in Carreras 1/32 and 1/24 track system. The bridge is easy to repaint for greater realism. The Red Bull signs in the center are printed on cardboard and slide into the bridges side structures. Press-fit assembly makes it easy to take apart for storage if needed, though you may want to coat the locator pins on the two foot structures with CA glue to make them a tighter fit. Let the CA set thoroughly before you assemble the bridge if you ever want to get it apart again.
Used with permission, Copyright 2018 Carrera Toys. Copyright 2018 Brey Corp. t/a Hobby Works