MINI-Z Racer MR-04EVO2 Chassis Set (N-MM2/4100kv)

Full model upgrade for the top of the MINI-Z series! Total balance takes performance to new heights

While retaining elements of the excellent MR-03 layout, the new MR-04EVO2 chassis achieves significant performance improvements with changes to the front suspension and a lower C of G that work in synergy with a sensored brushless motor. Both narrow and wide tread settings are available by changing the lower and upper plates on the front as well as the steering tie rod. Adjustable wheelbase allows chassis setting according to body type.

While camber angle is optimized during cornering with the swing of the current upper arm design, the front suspension uses the new kingpin-integrated knuckle to further improve camber stability. Geometric revision of caster and trail etc. delivers more linear maneuverability. New spec front springs for the MR-04 with different hardness are available as options.

Specs:

• Length 120.6mm
• Width 6776mm
• Height 35mm
• Motor Mount MM2
• Wheelbase 94.0mm(L)
• Tread(F/R)58.565.0mm/61.565.0mm
• Tires (F/R) &phi25×8.5mm (sold separately)/&phi25×8.5?11mm(sold separately)
• Gear Ratio 7.3?6.3?5.5?4.9:1
• Weight 138.0g(Body / tires / wheels not included.)
• Motor KYOSHO SPEED HOUSE / XSPEED 41 (KV4100)

Contents:

• MR-04EVO2-N-MM2 Factory assembled chassis with KYOSHO SPEED HOUSE KV4100 brushless motor
• Parts set for changing front tread
• 6T7T8T9T Pinion gears
• Wheel wrench
• Tools for pinion gears
• Spare wheel nuts

Required:

• Transmitter
• Receiver unit (Compatible with EVO/EVO2)
• ASC
• AAA x 4 batteries for chassis
• Batteries for transmitter

Used with permission, copyright ©2024 Kyosho America. Copyright ©2024 Brey Corp. t/a Hobby Works.®

WARNING: This product contains and can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov