Estes Cadet Model Rocket

Looking for a fast and easy rocket build that still looks great? Look no further than the Cadet Model Rocket!

Featuring an injection molded base with integral fins and launch lugs, this rocket is a breeze to assemble. Plus, with a pre-colored body tube and included stickers for decoration, there's no need to worry about painting. The Cadet Model Rocket comes with a 12 inch brightly colored parachute for recovery. With its easy assembly and great looks, you'll love launching the Cadet Rocket.

To build the Cadet Model Rocket, you'll need scissors, a pencil, ruler, yellow glue, plastic cement, hobby knife, and masking tape (not included). To launch, you'll need the Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters, and recovery wadding. Don't forget to grab four 1.5V AA alkaline batteries for the launch controller (not included).

• SKILL LEVEL: The Cadet is an easy-to-assemble Beginner level rocket with pre-colored parts.
• RECOMMENDED ENGINES: A8-3, B4-4, B6-4, C6-7
• PROJECTED ALTITUDE: 1100 ft. (335 m) on a C6-7

Specifications:

• Recommended Engines    A8-3, B4-4, B6-4, C6-7
• Launch System    Porta-Pad II
• Projected Max Altitude    1100 ft. (335 m)
• Recovery System    12 in. (cm) Parachute
• Length    17.5 in. (44.5 cm)
• Diameter    0.98 in. (25 mm)
• Weight    1.7 oz. (48.2 g)
• Fin Material    Molded Plastic

Needed to launch:

• Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller
• Estes model rocket engines (Recommended C6-7, B4-4, B6-4, A8-3)
• Starters
• Recovery wadding
• Four 1.5V high quality AA alkaline batteries

Used with permission, copyright ©2023 Estes Rockets. Copyright ©2023 Brey Corp. t/a Hobby Works.®