This waterproof, steel-geared servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted. Precision steel gears, stump-pulling torque, and waterproof to IP67 standards (operates for up to 30 minutes in water up to 3 feet deep).
 
Features:
- Center aluminum with nylon composite top and bottom case
- Operates directly on 7.4v without the need for an external BEC
- Precision ball bearings
 
Specifications:
- Torque @6.0V - 36.0 kg/500 oz-in
- Torque @7.4v - 46.0 kg/638 oz-in
- Speed @6.0V - 0.17 sec/60 deg
- Speed @7.4v - 0.14 sec/60 deg
- Weight: 83g / 3.27oz
- Dimensions L x W x H mm: 40.6 x 20.7 x 46.1
 
Technical Specs:
- Operating Temperature: 14° - 122°F (-10° - 50°C)
- Running Current (no load): 120mA @6.0V, 150mA @7.4V
- Stall Current (at locked): 8200mA @6.0V, 10000mA @7.4V
- Idle Current: 5mA @6.0V, 5mA @7.4V
- Wire Length: 400 +/- 5mm
- Output Gear Spline: 25 Tooth
- Bearings: 2BB
- Operating Travel: 100° (1000 &rarr 2000 µ second)
- Neutral Position: 1500 µ second
- Pulse Width Range: 800 &rarr 2200 µ second
- Maximum Travel: Appx 130° (900 &rarr 2100 µ second)
- Refresh Rate: 333 Hz
- Motor Type: Coreless
 
Used with permission, copyright ©Savox USA. Copyright ©2023 Brey Corp. t/a Hobby Works®