RPM A-arms are significantly beefier than RPM's original 6S version A-arms. Lower A-arm support beams are 30% thicker while upper A-arms are more than 22% thicker. The added thickness not only improves durability and strength, it also reduces flex. Less flex equates to more predictable suspension performance and handling.
On the lower A-arm, RPM added a second shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.
As for the upper A-arm, RPM eliminated the caster spacers. This gave RPM room to widen the arm at the inner hinge pin mount. The extra width creates more of an “A” shape, stabilizing the upper A-arm. A more stable A-arm improves steering and suspension performance while adding strength and durability.
All RPM A-arms are molded from RPM's nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!
 
Version Notes:
 
Needed to Complete
 
Used with permission, copyright ©2022 RPM Custom Engineered R/C Products ®/Horizon Hobbies, Inc.® Copyright ©2022 Brey Corp. t/a Hobby Works.®
$6 Flat Rate Shipping. FREE Over $199* Most Orders