RC4WD Wired Winch Control Unit

By:rc 4 wheel drive
$39.99
Quantity: Only 1 left in stock.

condition:New

UPC:639302579299

MFR:RC4ZS1089

This is the wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel.

 

Specifications:

  • Receiver
    • Small Compact Size
    • Operating Voltage 6V to 11.1V
    • Requires 3 position Third Channel
    • Easy Plug and Play
    • Instruction Included
    • Length: 1.6in / 41mm
    • Width: 1.2in / 31mm
    • Height: 0.39in / 10mm
    • Weight: 0.35oz / 10g
  • Wire
    • Length: 6in / 150mm
    • Wires Weight: 0.14oz / 4g

 

What's Included:

  • 1x Wired Control Unit
  • 1x 6" Receiver/Receiver Power Wire
  • 1x 6" Receiver/Winch Control Wire

 

Optional Parts:

  • RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119)
  • RC4WD 1/8 Warn Zeon 10 Winch (Z-E0069)
  • RC4WD 1/10 Mini Warn 9.5cti Winch (Z-S1571)
  • RC4WD 1/10 Warn 8274 Winch (Z-E0075)
  • For Shorter Wires 3" Wiring Pack (Z-S1001)
  • For Longer Wires 9" Wiring Pack (Z-S0999)

 

Notes:

  • You will need a radio with a third channel to operate this controller.
  • Your third channel needs to be a three position switch (on/off/on).
  • If your radio does not have a three position switch, you can purchase a wireless controller unit. (Z-S1092)
  • This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
  • Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery.

 

Used with permission, copyright ©2022 RC4WD USA. Copyright ©2022 Brey Corp. t/a Hobby Works.®

$6 Flat Rate Shipping. FREE Over $199* Most Items