Lumenier QAV210 CHARPU Carbon Fiber FPV Quadcopter

Designed for and named after one of the top FPV pilots in the world, the new Lumenier QAV210 CHARPU Carbon Fiber FPV Quadcopter airframe is CHARPUs new go to frame for acrobatic FPV sessions.

The QAV210 CHARPU is an extended version of the new QAV180, Lumeniers smallest FPV quad kit to date. The QAV210 CHARPU is designed to be the smallest possible airframe while comfortably supporting 5" props and 220X size motors. The assembled kit containing Carbon Fiber Plates, Power Distribution Board and all hardware weighs in at only 91g. The included, but optional landing gear adds another 5g.

Like its popular big brother, the Lumenier QAV250, the QAV210 CHARPU utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. The QAV210 CHARPU is an awesome FPV racer and acrobat. The frame is designed to mount a mini 26mm FPV camera like the Lumenier CM-650 at a range of angles. Alternatively, the frame also includes a mounting plate to mount standard 32mm board cameras at a fixed 20 degree angle.

The airframe is designed to support both 3s or 4s lipo setups and can comfortably carry 1000mah and 1300mah lipos.

Features

Full 3K Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate.
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.
Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s)
Support for 32mm board cams as well as 26mm cams in cases such as the Lumenier CM-650.
Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)
Included Landing Gear

Weight

Airframe: 91g (with PDB and hardware), 96g with included Landing Gear.
AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear, but without Lipo or HD camera).

Optional HD Vibration Mount

The QAV210 CHARPU does not exhibit any vibration in the on-board FPV camera signal. For pilots that wish to equip their QAV210 CHARPU with a Mobius, GoPro or GoPro Session, Lumenier offers a vibration isolation camera mounting kit.

Includes

1x QAV210 CHARPU carbon fiber airframe, board camera mount, 26mm camera mount, and hardware (including 35mm frame spacers)
1x Lumenier 4Power Power distribution board + set of 6mm stand offs
1x XT-60 Pig-Tail and silicone grommet
1x set of 10mm aluminum landing gear and vinyl feet
4" Anti-Vibration neoprene tape
1x Lumenier lipo strap