This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.
- Hard anodized aluminum construction
- Compression mount, two screws install on either side of arm and tighten center hole around servo spline
- Axial 25T Aluminum Servo Horn
- Two 2x8mm socket head screws
- Length: 0.98" (25mm) from center of servo mounting hole to end of arm
- Hole Diameter: 3mm
- Pitch: 3x30
Used with permission, copyright 2019 Axial Racing/Tower Hobbies, Inc. Copyright 2019 Brey Corp. t/a Hobby Works.