Thats 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, weve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030 or 1/32 of slop from the inner arm mount and more than 0.010 or slightly less than 1/64 of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.
Used with permission, copyright 2020 RPM Custom Engineered R/C Products/Horizon Hobby, Inc. Copyright 2020 Brey Corp. t/a Hobby Works