Pro-Line Reaction HP Belted s# Rear 2.2in/3.0in Drag Racing Tires (2 pcs)

This is a pair of Reaction HP SC 2.2"/3.0" Belted Drag Racing Tires.

Pro-Line is proud to introduce the History-making Reaction HP BELTED Drag Racing Slick SC tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the all-new Reaction HP Drag tires. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, which will give you maximum control to put the power down! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line due to the soft S3 compound but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! Get maximum grip and stability so you can be faster than your racing buddies with Pro-Line's all-new Reaction HP Drag Slick SC tires!

Please note that the Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by " diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

Please note: All tires & wheels are sold in pairs, unless otherwise noted

PRO10170203 Reaction HP SC 2.2"/3.0" S3 (Soft) Drag Racing BELTED Tires (2) for SC Trucks Rear

Features

• Molded-in High-Performance Herringbone Weave Pattern Belt
• Reaction HP Tire Will Not Balloon or Expand During Use
• Specifically Made for No-prep Drag Racing
• Soft S3 compound Provides Incredible Grip on Your Drag Strip
• Belted Slicks Give You Control to Put the Power Down
• Soft Foam Inserts Included
• For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel
• Tires Made in the USA, since 1982

Fits

• 2.2"/3.0" Short Course Rear Wheels

In The Box

• (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires
• (2) Soft Foam Inserts

Product Specifications

• Manufacturer #     10170-203
• Tire Tread     Reaction HP BELTED
• Vehicle Type     Drag Car
• Inner Tire / Outer Wheel Diameter     2.2 / 3.0 in
• Product Width     1.8" (46 mm)
• Package Type     Tires and Inserts
• Tire Type     Drag
• Track Surface     Drag Racing
• Wheel Position     Rear
• Compound / Hardness     Soft
• Scale     1/10
• Insert Material     Open Cell
• Product Height     4.15" (105 mm)
• Quantity Option     2 in a package
• Tire Compound     S3 (Soft)
• Front or Rear     Rear

Used with permission, copyright ©2022 Pro-Line Racing/Horizon Hobby, Inc. Copyright ©2022 Brey Corp. t/a Hobby Works.®