Mini FuntanaX ARF
 
Key Features

• Tapered thickness airfoil for improved aerodynamic performance
• Optional Side Force Generators (SFG's) included
• Designed for use with E-flite’s Park 480 Brushless Outrunner Motor
• Balsa/lightweight plywood construction covered in genuine UltraCote
• Wing fillets
• Aluminum landing gear and steerable tail wheel
• Easy-access magnetic battery hatch
• Factory-painted fiberglass cowl and wheel pants
• Assembles in just a few evenings
• Generous wing area for lighter wing loading—26% larger than original Mini Funtana
• Large control surfaces for precise control in high-alpha flight

Overview

The Mini FuntanaX is another in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.

To create the new Mini FuntanaX™ ARF, E-flite® began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted with an E-flite Park 480 brushless outrunner, the Mini FuntanaX is capable of superb vertical performance.
 
Specs

• Wing Span: 43 in (1092mm)
• Overall Length: 40.5 in (1028mm)
• Wing Area: 447 sq in (28.8 sq dm)
• Flying Weight: 27–29 oz (765–822 g)
• Motor Size: Park 480 BL Outrunner
• Radio: 6-channel TX and micro RX
• Servos: 4 sub-micro
• CG (center of gravity): 3 3/4" (95mm) behind the leading edge
• Prop Size: 12x6 Electric
• Hardware Included: Yes
• Speed Control : 40A Brushless
• Recommended Battery: 11.1V 3-cell 2100mAh Li-Po
• Control Throw (Ailerons): Low 1" (25mm) Up/Down or High 1 7/8" (48mm) Up/Down
• Control Throw (Elevator): Low 3/4" (19mm) Up/Down or High 2 5/16" (58mm) Up/Down
• Control Throw (Rudder): Low 1 3/4" (45mm) Left/Right or High 2 3/4" (70mm) Left/Right
• Approx. Assembly Time: 4 hours

Needed to Complete

• 6-channel transmitter (for proper mixing and dual rate capabilities)
• Micro receiver
• 4 sub-micro servos
• Motor
• 40A Brushless ESC
• 12x6 Electric
• Battery & Charger

Used with permission, copyright (c)2007 Horizon Hobby, Inc.