DESCRIPTION
A cutting disc made of a hard abrasive and reinforced with fiberglass. It is 0.045" (1.2 mm) thick with a diameter of 1-1/4" (32.0 mm).
USES
Ideal for cutting, grooving and trimming all kinds of materials—including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
TIPS
- For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto.
- Secure objects to a stable surface while working.
- Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
- Keep a light touch, as the wheel will break under too much pressure.
- If chattering occurs, increase speed.
- Plastics require very slow speeds, because they tend to melt at the contact point.
TOOL(S) USING THIS BIT
#275 Single-Speed MultiPro® Rotary Tool
#2850-01 Two-Speed MultiPro® Rotary Tool Kit
#395 Variable-Speed MultiPro® Rotary Tool
#398 Digital Rotary Tool
#732 Heavy-Duty Flex-Shaft Tool
#750 MINIMITE® Cordless Rotary Tool
#7700 7.2V Cordless MultiPro® Rotary Tool Kit
#7800-01 9.6V Cordless MultiPro® Rotary Tool Kit
MANDREL(S) NEEDED WITH THIS BIT
#402 Mandrel
Used with permission, copyright (c)2002 Dremel Mfg. Div.
