DESCRIPTION
A high-quality, versatile cutter made from high-grade steel.
USES
Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods—especially on flat and slotted surfaces.
TIPS
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
TOOL(S) USING THIS BIT
#275 Single-Speed MultiPro® Rotary Tool
#2850-01 Two-Speed MultiPro® Rotary Tool Kit
#395 Variable-Speed MultiPro® Rotary Tool
#398 Digital Rotary Tool
#732 Heavy-Duty Flex-Shaft Tool
#750 MINIMITE® Cordless Rotary Tool
#7700 7.2V Cordless MultiPro® Rotary Tool Kit
#7800-01 9.6V Cordless MultiPro® Rotary Tool Kit
COLLET(S) FOR THIS BIT
#480 1/8" Collet
#585 1/8" Collet
Used with permission, copyright (c)2002 Dremel Mfg. Div.
