Typhoon 2 3D RTF Electric
Key Features
- Ready-to-fly 3D performance right from the box
- Reusable ZX10 72MHz radio system including digital, metal gear 3-wire servos for precise control and fast response
- 3-cell 1800mAh Li-Po battery included with variable rate balancing charger
- BL400-15T gear-reduced, brushless motor with E-flite® 25-amp speed control
- Dual metal gear, digital aileron servos
- Optional Side Force Generators™ included for improved stability and response in knife-edge fight
- Large control surfaces for maximum 3D performance
- Dual flight modes (High and Low Rate)
- PNP version also available (PKZ4375)
Overview
ParkZone’s Charge-and-Fly™ Typhoon™ 2 3D is for experienced RC pilots who want the thrills of unlimited action in an electric park flyer without the hassles of building one. Equipped with oversized control surfaces and a powerful ParkZone™ BL400-15T brushless motor and digital metal gear servos, it can perform the most aggressive 3D maneuvers imaginable with laser precision and power to spare. Hovers, harriers, torque-rolls, waterfalls—the Typhoon 2 does them all. The removable side force generators can be attached with just eight screws. And because the wings and fuselage are molded from ParkZone’s super-strong, feather-light Z-foam™ material, it can handle the punishment of these high-energy 3D aerobatics without getting bent out of shape.
Getting the Typhoon 2 airborne is about as simple as it gets. Everything you need is in this box. Just attach the wing, tail and landing gear, charge up the included Li-Po battery pack and in as little as 40 minutes, you’re flying. Once in the air you can choose between Low and High Rate with a flip of the transmitter switch.
Specs
- Wing Span: 39.4 in (1000mm)
- Overall Length: 36.6 in (935mm)
- Flying Weight: 26 oz (740 g)
- Motor Size: BL400-15T brushless, gear reduced
- Radio: 72mHz 5+ channel FM proportional ZX10
- Servos: Four 3-wire digital servos
- Trim Scheme Colors: White fuselage and wing with purple, yellow and black decals
- CG (center of gravity): Approx. 3.5" (89mm) back from the leading edge of the wing.
- Prop Size: 13.5 x 7 and 12 x 8.75 (both included)
- Speed Control : E-flite® 25A brushless ((EFLA1025)included)
- Recommended Battery: 3-cell 1800mAh Li-Po battery ((PKZ1031)included)
- Aileron: Proportional
- Elevator: Proportional
- Rudder: Proportional
- Throttle: Proportional
- Approx. Flying Duration: 12-15 minutes on 1800mAh Li-Po
- Approx. Assembly Time: 15 minutes
- Gear Ratio: 8:1
- Available Frequencies: Channels 17 (72.130), 19 (72.170), 21 (72.210), 50 (72.790), 52 (72.830) and 54 (72.870)
- X-Port: No
- Charger: 2-3 cell DC Li-Po charger
- Landing Gear: Steerable tail wheel, Wire gear, Foam wheels
Used with permission, copyright (c)2007 Horizon Hobby, Inc.
