25-Amp Pro Brushless ESC
Key Features:
- Up to 25 amps continuous current with proper air flow
- Finned heat sinks for both the motor drive mosfets and dual BEC regulators to support up to 4 sub-micro servos
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
- Programmable throttle input range (1.1ms-1.9ms or Auto Select)
- Soft start
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—2 user selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
Overview:
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2-3 cell Li-Po battery packs and up to four sub-micro servos. The ESC features a lightweight plastic case, with exposed, finned heat sinks for both the motor drive mosfets, and unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.
Specifications:
- Brake: Yes - Programmable
- Continuous Maximum Current: 25A
- Input Connector Types: 16 AWG with E-flite EC3 Connector
- Output Connector Types: 16 AWG with 3.5mm Female Gold Bullet Connectors
- Momentary Peak Current: 30A (15 sec)
- Dimensions (WxLxH): 28x48x11 mm (1.1x1.9x.4 in)
- Weight: 32g (1.2 oz)
- Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
Used with permission, copyright (c)2006 Horizon Hobby, Inc.
